Aerio L4-2.0L (2002)
Clockspring Assembly / Spiral Cable: Service and Repair
Clockspring
Contact Coil and Combination Switch Assembly Removal and Installation
CAUTION: Do not turn contact coil (on combination switch) more than allowable number of turns (about two and a quarter turns from the center
position clockwise or counterclockwise respectively), or coil will break.
Removal
1. Remove steering wheel from steering column.
2. Remove steering column hole cover (1).
3. Remove steering column cover screws (1).
4. Separate upper cover (2) and lower cover (3), then remove them.
5. Remove contact coil and combination switch assembly screws (1) and disconnect connectors (2) from combination switch (3).