Aerio L4-2.0L (2002)
2) Uncaulk drive shaft nut (1).
3) Depress foot brake pedal and hold it there. Remove drive shaft nut (1).
4) Remove caliper carrier bolts.
5) Remove caliper (1) with carrier.
NOTE: Hang removed caliper with a wire hook or the like (3) so as to prevent brake hose (4) from bending and twisting excessively or being
pulled. Don't operate brake pedal with pads removed.
6) Pull brake disc (2) off by using two 8 mm bolts.
7) Pull out wheel hub (1) with special tools.
Special Tool
(A): 09943-17912
(B): 09942-15511
CAUTION: When wheel hub is removed, replace wheel bearing with new one.