Aerio L4-2.3L (2006)
Liftgate Window Glass: Removal and Replacement
Rearend Door Glass (for Wagon Model) Removal and Installation
Rearend Door Window (For Wagon Model) Components
Refer to Windshield Removal and Installation as removal and installation procedures are basically the same. However, note the following.
^
Observe the following precautions when applying adhesive (1) along glass (2) edge.
^
Adhesive (1) should be applied evenly especially in height.
^
Be careful not to damage primer (3).
^
With the position of fastener (4) properly aligned, install glass (2) on rear end door panel (5).
^
Press glass against body quickly after adhesive (1) is applied.
Adhesive amount specifications and position for back door glass
Height "a": 14 mm (0.55 in.)
Width "b": 7 mm (0.28 in.)
Width "c": 16 mm (0.63 in.)
Position "d": 14 mm (0.55 in.) for glass upper and side sections
Position "d": 15 mm (0.59 in.) for glass bottom section
