Aerio L4-2.3L (2006)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Ring Replacement
Front
Removal and Installation
NOTE: The front wheel sensor ring can not be removed or replaced alone. If front wheel sensor ring needs to be replaced, replace it as a wheel side
joint assembly of drive shaft.
For removal and installation of wheel side joint assembly of drive shaft, refer to Drive Shaft; Service and Repair.
Inspection
-
Check ring for being missing, damaged or deformed.
-
Turn drive shaft and check if ring rotation is free from eccentricity and looseness.
-
Check that no foreign material is attached.
If any faulty is found, repair or replace.
Rear
Removal and Installation
NOTE: The rear wheel sensor ring can not be removed or replaced alone. If rear wheel sensor ring needs to be replaced, replace it as a wheel hub
assembly.
For removal and installation of wheel hub assembly, refer to Wheel Hub; Service and Repair.
Inspection
-
Check ring serration (teeth) for being missing, damaged or deformed.
-
Turn wheel and check if ring rotation is free from eccentricity and looseness.
-
Check that no foreign material is attached.
If any faulty is found, repair or replace.