Aerio L4-2.3L (2006)
3) Ream valve guide bore with special tool (6.0 mm reamer). After reaming, clean bore.
Special Tool
(A): 09916-34542
(B): 09916-37810
4) Install valve spring seat to cylinder head.
5) Install new valve stem seal (1) to valve guide. After applying engine oil to seal and spindle of special tool (Valve guide installer handle), fit oil
seal to spindle, and then install seal to valve guide by pushing special tool by hand. After installing, check to be sure that seal is properly fixed to
valve guide.
Special Tool
(A): 09917-98221
(B): 09916-58210
NOTE:
^
Do not reuse seal once disassembled. Be sure to install new seal.
^
When installing, never tap or hit special tool with a hammer or else. Install seal to guide only by pushing special tool by hand. Tapping or
hitting special tool may cause damage to seal.
