Aerio L4-2.3L (2006)
6) Install A/C compressor bracket (1) if equipped. Tighten bracket bolts to specified torque.
Tightening torque
A/C compressor bracket bolts (a): 55 Nm (5.5 kgf-cm, 40.0 ft. lbs.)
7) Install oil pan.
8) Install crankshaft pulley. To lock crankshaft pulley (1), use special tool (camshaft pulley holder) with it as shown in figure.
Special Tool
(A): 09917-68221
NOTE: Be sure to use the bolts instead of pins for fixing special tool to crank pulley. Bolt size: M8, P 1.25 L = 25 mm (0.98 inch)
Strength: 7T
Tightening torque
Crankshaft pulley bolt (a): 150 Nm (15.0 kgf-cm, 108.5 ft. lbs.)
9) Install engine assembly to vehicle.