Aerio L4-2.3L (2006)
Evaporator Core: Service and Repair
A/C Evaporator Removal and Installation
Reference: Heater and Cooling Unit Components:Manual Type
CAUTION: Be careful not to damage A/C evaporator fins. If A/C evaporator fin is bent, straighten it by using flat head screwdriver or pair of pliers.
Removal
1. Disconnect negative (-) cable at battery.
2. Recover refrigerant from A/C system.
NOTE: The amount of removed compressor oil must be measured for replenishing compressor oil.
3. Remove blower unit.
4. Disconnect suction pipe (1) and condenser outlet pipe (2) using special tools.
Special Tool
(A): 09991-15410 (For condenser outlet pipe)
(B): 09991-15420 (For suction pipe)
CAUTION: Keep internal parts of air conditioning system free from moisture and dirt. When disconnecting any line from system, install a blind
plug or cap to the fitting immediately.
5. Fully remove packing from expansion valve.
