Aerio L4-2.3L (2006)
4. Install transmission fluid sensor (5) and sensor wire to clamp.
5. Clean mating surface of A/T side cover and A/T case.
6. Apply sealant to mating surface of A/T side cover and A/T case by using a nozzle (1) as shown in figure by such amount that its section is 1.5 mm
(0.059 inch) in diameter.
"A": Sealant 99000-31230
7. Install transaxle side cover (1).
NOTE: Apply sealant to 2 bolts (2).