Aerio L4-2.3L (2006)
-
The connector shape and terminal layout shown in this manual are those when viewed from "Z" in the illustration.
Refer to List of Connectors.
NOTE: Molded terminal numbers that are different from the above can be found on some connectors in rare cases.
These molded numbers are not applied in this manual.
2. Connector type
3. Terminals in one connector (Broken line) (B15)/Terminals in different connectors (B14, B16)
4. Joint connector (J/C)
-
The joint connector (J/C) connects several different wires with the same wire color at one place instead of connecting them by welding or
caulking one by one. It is not an ordinary connector but a part of the continuous wire in the harness.
5. Junction block (J/B)
