Aerio L4-2.3L (2006)
Remote Switch: Testing and Inspection
Remote Audio Control Switch Inspection
Remote Audio Control Switch Inspection
1. Remove driver air bag (inflator) module.
2. Disconnect remote audio control switch connector from contact coil.
3. Check switch (1) for resistance between "a" and "c" terminals under each condition below. If check result is not satisfactory, replace remote audio
control switch.
"MUTE", "+" and "-" switch resistance
All switches released (OFF): 90 - 110 kilo ohm.
"MUTE" switch pushing on (ON): 313 - 345 ohm.
"+" switch pushing on (ON): 950 - 1050 ohm.
