Aerio L4-2.3L (2006)
1. Remove driver air bag (inflator) module.
2. Disconnect cruise control lever connector (1) from cruise control lever (2).
3. Check for resistance between "b" and "c" terminals under each condition below.
If check result is not satisfactory, replace cruise control lever (2).
SET/COAST, RESUME/ACCEL and CANCEL switches resistance
All switches released (OFF): Infinity
CANCEL switch (4) pulled (ON): About 0 ohm.
SET/COAST switch (5) moved down (ON): 217 - 223 ohm.