Aerio L4-2.3L (2006)
Installation
1) Install suspension frame to vehicle body and tighten suspension frame bolts to specified torque.
Tightening torque:
Suspension frame mounting bolts (a): 90 Nm (9.0 kgf-cm, 65.0 ft. lbs.)
2) Install differential mounting, mounting bracket and differential to suspension frame. Tighten each bolt to specified torque.
3) Connect No.2 propeller shaft to differential aligning match marks on flanges. Tighten bolts and nuts to specified torque.
4) Install right and left drive shafts.
5) Install control rods.
6) Install stabilizer bar.
7) Install muffler.
8) Fill differential oil.
9) Install wheels and tighten wheel nuts to specified torque.
Tightening torque
Wheel nut 85 Nm (8.5 kgf-cm, 61.5 ft. lbs.)