Aerio L4-2.3L (2006)
5) Install brake drum (1).
6) Pull up parking brake lever fully and tighten new drive shaft nut (2) to specified torque.
Tightening torque
Drive shaft nut (a): 175 Nm (17.5 kgf-cm, 126.5 ft. lbs.)
7) Caulk (3) drive shaft nut (2).
WARNING: Be careful while caulking nut so that no crack will occur in caulked part of nut. Cracked nut must be replaced with new
one.
8) Install wheel and tighten wheel nut to specified torque.
Tightening torque
Wheel nut 85 Nm (8.5 kgf-cm, 61.5 ft. lbs.)
9) Perform brake test.
