Aerio L4-2.3L (2006)
Clutch Disc: Service and Repair
Clutch Cover, Clutch Disc and Flywheel Removal and Installation
Clutch Cover, Clutch Disc and Flywheel Removal and Installation
Removal
1. Dismount transaxle.
2. Hold flywheel stationary with special tool and remove clutch cover bolts (2), clutch cover (1) and clutch disc.
Special Tool (A): 09924-17811
3. When pulling out input shaft bearing (1) from flywheel (2), use the following special tool.
Special Tool
(A): 09921-20210
(B): 09930-30104
Installation
NOTE: Before assembling, make sure that flywheel surface and pressure plate surface have been cleaned and dried thoroughly.