Aerio AWD L4-2.0L (2003)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
ABS Hydraulic Unit/Control Module Assembly Removal and Installation
CAUTION: Never disassemble ABS hydraulic unit/control module assembly, loosen blind plug or remove motor. Performing any of these prohibited
services will affect original performance of ABS hydraulic unit/control module assembly.
On-Vehicle Inspection
CAUTION: Never disassemble ABS hydraulic unit/control module assembly, loosen blind plug or remove motor. Performing any of these prohibited
services will affect original performance of ABS hydraulic unit/control module assembly.
Check hydraulic unit for fluid leakage.
If any, repair or replace
Removal
CAUTION: Never disassemble ABS hydraulic unit/control module assembly, loosen blind plug or remove motor. Performing any of these prohibited
services will affect original performance of ABS hydraulic unit/control module assembly.
NOTE: Before removal, inspect the parts.
1. Disconnect negative cable from battery.
2. Disconnect ABS hydraulic unit/control module assembly connector (1) by pulling up lock (2).