Aerio AWD L4-2.0L (2003)
Brake Pad: Service and Repair
Removal
1. Loosen wheel nuts and with vehicle lifted up, remove wheels.
2. Remove caliper pin bolts (1).
3. Remove caliper (1) from caliper carrier (2).
NOTE: Hang removed caliper (1) with a wire hook (4) or the like so as to prevent brake hose from bending and twisting excessively or being
pulled. Don't operate brake pedal with brake pads removed.
4. Remove brake pads (3).
Installation
1. Before installing brake pad shim, apply small amount of grease (included in spare parts) to mating surfaces of brake pad and pad shim.
2. Set brake pad springs (1) and shim (2) and install brake pads (3).
NOTE: For right side brake, install pad with wear indicator (4) to vehicle center side.