Aerio AWD L4-2.0L (2003)
4. Tighten heater outlet pipe bolt (1).
5. Install generator belt.
6. Install radiator outlet hose to thermostat cap.
7. Fill coolant.
8. Connect negative cable at battery.
9. Check each part for leakage.
Inspection
CAUTION: Do not disassemble water pump. If any repair is required on pump, replace it as assembly.
^
Rotate water pump by hand to check for smooth operation. If pump does not rotate smoothly or makes abnormal noise, replace it.
^
Inspect water pump (1) impeller (2) for damage. Replace as necessary.