Aerio AWD L4-2.0L (2003)
10. Remove A/C evaporator outlet air temperature sensor (2).
11. Remove air joint duct (3).
12. Pull out A/C evaporator from heater and cooling unit (4).
Installation
Reverse removal procedure to install cooling unit noting the following instructions.
-
Replenish specified amount of compressor oil to compressor suction side by referring to "Replenishing Compressor Oil" in "Operation Procedure
for Refrigerant Charging:".
-
Evacuate and charge refrigerant by referring to "Operation Procedure for Refrigerant Charging:".