suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Clockspring|Page 3764 > < Clockspring|Page 3762
Page 3
background image

5. Install steering wheel to steering column. 

Centering Contact Coil 
1. Check that vehicle's wheels (front tires) are set at straight-ahead position.
2. Check that ignition switch is at "LOCK" position.

3. Turn contact coil (1) counterclockwise slowly with a light force till contact coil (1) will not turn any further.

NOTE:  Contact coil (1) can turn about 4 and a half turns at maximum, that is, if it is at the center position, can turn about two and a quarter
turns both clockwise and counterclockwise
.

4. From the position where contact coil (1) became unable to turn any further (it stopped), turn it back clockwise about two and a quarter

rotations and align center mark (2) with alignment mark (3).

Clockspring|Page 3764 > < Clockspring|Page 3762