Aerio AWD L4-2.0L (2003)
2) Install control rod No.2 (2).
a) Install control rod No.2 (2), setting it so that its welded nut (8) comes toward the front.
b) Insert control rod No.2 bolt (9) from the vehicle front and outer bolt (3) from the rear.
c) Install washer (6) with its graduated part facing down.
d) With marks (7) on washer (6) and frame marked before removal aligned to each other, tighten bolts (3) and nut (5) temporarily by hand.
3) Install stabilizer bar and tighten bolts (1) and nuts (2) by hand.
4) Install wheels and tighten wheel nuts to specified torque.
5) Lower hoist and bounce vehicle up and down to stabilize suspension.
6) Tighten control rod bolts and nuts to specified torque with vehicle weight on suspension.