Aerio AWD L4-2.0L (2003)
Wheel Bearing: Service and Repair
Rear Knuckle, Wheel Bearing / Oil Seal Removal and Installation
Removal
Once bearing outer race is removed, bearing set (outer race, bearings and inner races) should be replaced with new one.
1) Remove wheel hub.
2) Remove knuckle from vehicle.
3) Remove outside oil seal (1) and snap ring (2) from knuckle.
4) Remove inside oil seal (6) from knuckle (5).
5) Remove bearing outer race / inner bearing using special tool and hydraulic press.
Special Tool
(A): 09924-84510-004
Installation
When replacing bearing, inner race or outer race, be sure to replace them with new ones as a set.