Aerio AWD L4-2.0L (2003)
7. Remove pressure control solenoid valve (1) by removing bolt (2) and clamp (3).
8. Remove TCC solenoid valve (1), shift solenoid valve-B (No.2) (2) and shift solenoid valve-A (No.1) (3) in that order by removing bolts.
Installation
1. Install shift solenoid valve-A (No.1) (1), shift solenoid valve-B (No.2) (2) and TCC solenoid valve (3) in that order.
Tightening torque
Shift solenoid bolts (a): 7.0 Nm (0.7 kgf-cm, 5.0 ft. lbs.)
Valve body bolts (b): 10 Nm (1.0 kgf-cm, 7.5 ft. lbs.)