Aerio AWD L4-2.0L (2003)
Front Corner Window Glass: Procedures
Front Pillar Window Removal and Installation
Refer to "Windshield Removal and Installation:" as removal and installation procedures are basically the same.
However, note the following.
-
Observe the following precautions when applying adhesive (1) along glass (2) edge.
-
Adhesive (1) should be applied evenly especially in height.
-
Be careful not to damage primer (3).
-
Press glass against body quickly after adhesive (1) is applied.
Adhesive amount specification and position for front pillar window
Height "a": 10 mm (0.39 in.)
Width "b": 6 mm (0.24 in.)
Position "c": 4.5 mm (0.18 in.)
Width "d": 12 mm (0.47 in.)
