Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Body and Frame > Bumper > Rear Bumper > System Information > Service and Repair

Page 1
background image

Rear Bumper: Service and Repair

Rear Bumper: Removal And Installation

REMOVAL

NOTE:  It is not necessary to remove the tow hitch (if equipped) to service the rear bumper.

1. Remove upper and lower step pads.
2. Disconnect license lamp harness RH/LH.
3. Release clips from license lamp RH/LH, then remove lamps from rear bumper.
4. Remove rear bumper.
5. Remove rear bumper reinforcement from frame.

Body and Frame > Bumper > Rear Bumper > System Information > Service and Repair

[PREV PAGE] [NEXT PAGE]