Equator 2WD V6-4.0L (2009)
REMOVAL
1. Remove front seats. Refer to [Front Seat: Removal and Installation].
2. Remove rear seats. Refer to [Rear Seat: Removal and Installation].
3. Remove storage boxes (if equipped).
4. Remove lower seat belt anchors (crew cab only). Refer to [LATCH (Lower Anchors and Tether for Children) System: Removal and Installation].
5. Remove lower body side trim panels. Refer to [Body Side Trim: Removal and Installation].
6. Remove center console. Refer to [Instrument Panel Assembly: Exploded View].
7. Remove floor mat hooks.
8. Remove carpet.
INSTALLATION
Installation is in the reverse order of removal.