Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Steering Angle Sensor, Traction Control > Component Information > Service and Repair

Page 1
background image

Steering Angle Sensor: Service and Repair

Steering Angle Sensor: Removal and Installation  

REMOVAL 

1) Remove the spiral cable.
2) Remove the screws and remove the steering angle sensor from the spiral cable.

INSTALLATION 

Installation is in the reverse order of removal.
^

Reset the neutral position of the steering angle sensor.

CAUTION:

Any time the steering angle sensor is removed and installed or replaced, you must reset the neutral position of the steering angle sensor. 

Brakes and Traction Control > Antilock Brakes / Traction Control Systems > Steering Angle Sensor, Traction Control > Component Information > Service and Repair

[PREV PAGE] [NEXT PAGE]