Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Procedures > Page 3173

Page 9
background image

1) Remove the rear wheel and tire.
2) Drain the brake fluid.
3) Remove the union bolt (A) then disconnect the brake hose and discard the copper washers.

CAUTION:

Discard the copper washers, do not reuse. 

4) Remove the sliding pin bolts (A) and remove the caliper body from torque member.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Caliper > Component Information > Service and Repair > Procedures > Page 3173

[PREV PAGE] [NEXT PAGE]