Equator 2WD V6-4.0L (2009)
CAUTION:
^
Do not reuse piston boot.
^
Press pistons in evenly and vary the pressing points to prevent the cylinder inner wall from being damaged.
4) Apply brake fluid to the piston (1), then install the piston (1) into the cylinder body and insert the piston boot (2) side lip into the piston groove as
shown.
CAUTION:
Press pistons in evenly and vary the pressing points to prevent the cylinder inner wall from being damaged.
5) Insert into cylinder body by hand and insert piston boot piston-side lip into piston groove.