Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Brakes and Traction Control > Hydraulic System, Brakes > Brake Hose/Line > Component Information > Service and Repair > Brake Tube and Hose: Hydraulic Circuit > Page 3214

Page 1
background image

Brake Hose/Line: Service and Repair
Brake Tube and Hose: Inspection After Installation

Brake Tube and Hose: Inspection After Installation 

CAUTION:

Brake pipes and hoses are important safety parts. Always disassemble the parts and retighten their fittings if brake fluid leak is detected.
Replace applicable part with new one, if damaged part is detected.
 

1) Check brake pipes and hoses, and connections for fluid leaks, damage, twist, deformation, contact with other parts, and loose connections. Replace

any parts as necessary.

2) While depressing brake pedal under force of 785 N (80 kg-f, 177 lb-f) with engine running for approximately 5 seconds, check each part for fluid

leaks.

Brakes and Traction Control > Hydraulic System, Brakes > Brake Hose/Line > Component Information > Service and Repair > Brake Tube and Hose: Hydraulic Circuit > Page 3214

[PREV PAGE] [NEXT PAGE]