Equator 2WD V6-4.0L (2009)
Brakes and Traction Control > Hydraulic System, Brakes > Brake Master Cylinder > Component Information > Service and Repair > Removal and Replacement > Page 3233
3) Remove the grommets from the master cylinder sub-assembly body.
Do not reuse grommets.
4) Remove the restriction washer from the master cylinder sub-assembly body.
Do not reuse restriction washer.
5) Remove the fluid level sensor.
Do not reuse fluid level pressure sensor.
Assembly is in the reverse order of disassembly.
Master cylinder sub-assembly cannot be disassembled.
Remove reservoir tank only when absolutely necessary.
While working, cover the primary piston rod with cloth to prevent it from being damaged.
Never use mineral oils such as kerosene, gasoline during the cleaning and assembly process.
Do not drop parts. If part is dropped, do not use it.
|[PREV PAGE] [NEXT PAGE]|