Equator 2WD V6-4.0L (2009)
Brakes and Traction Control > Hydraulic System, Brakes > Hydraulic Control Assembly - Antilock Brakes > Component Information > Service and Repair > Type 1 (ABS) > Page 3221
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Actuator and Electric Unit (Assembly): Removal and Installation
1) Disconnect the negative battery terminal.
To remove the brake tubes, use a flare nut wrench to prevent the flare nuts and brake tubes from being damaged.
Be careful not to splash brake fluid on painted areas.
4) Disconnect the brake tubes.
|[PREV PAGE] [NEXT PAGE]|