Equator 2WD V6-4.0L (2009)
Drum Inner Diameter Inspection
^
Check the drum inner diameter.
Other Inspections
^
Check the shoe sliding surface for excessive wear and damage.
^
Check the shoe anti-rattle pin for excessive wear and corrosion.
^
Check the front and rear return springs for sagging.
^
Check the adjuster for rough operation.
^
When disassembling adjuster, apply PBC (Poly Butyl Cuprysil) grease or equivalent to the adjuster threads.
^
Check either visually or with a vernier caliper for any excessive wear, cracks, or damage inside the drum.
INSTALLATION
Installation is in the reverse order of removal.
^
Apply brake grease to the back plate at the specified points during installation.
^
Install the adjuster so that the threaded part expands when rotating it in the direction shown by the arrow.
