Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Brakes and Traction Control > Power Brake Assist > Vacuum Brake Booster > Component Information > Service and Repair > Brake Booster: Removal and Installation > Page 3260

Page 3
background image

Input rod (2) with lock nut (1) length (A) standard: 

2) After adjusting input rod length (A), temporarily tighten the lock nut (1) and install the booster assembly to the dash panel.

^

Install gaskets and spacer block between the booster assembly and the dash panel.

3) Connect the input rod using the brake pedal clevis pin (2) and snap pin (1) from inside the vehicle.

Brakes and Traction Control > Power Brake Assist > Vacuum Brake Booster > Component Information > Service and Repair > Brake Booster: Removal and Installation > Page 3260

[PREV PAGE] [NEXT PAGE]