Equator 2WD V6-4.0L (2009)
Engine, Cooling and Exhaust > Cooling System > Water Pump > Component Information > Service and Repair > Water Pump: Exploded View > Page 1396
Pull straight out while preventing vane from contacting socket in installation area.
Remove water pump without causing sprocket to contact timing chain.
Do not spill engine coolant into timing chain case.
c) Remove M8 bolts and O-rings from water pump.
INSPECTION AFTER REMOVAL
Check for badly rusted or corroded water pump body assembly.
Check for rough operation due to excessive end play.
|[PREV PAGE] [NEXT PAGE]|