Equator 2WD V6-4.0L (2009)
Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft, Engine > Component Information > Service and Repair > Camshaft: Exploded View > Page 946
Discard IVT control solenoid valve gaskets and use new gaskets for installation.
4) Remove camshaft brackets.
Mark camshafts, camshaft brackets and bolts so they are placed in the same position and direction for installation.
Equally loosen camshaft bracket bolts in several steps in reverse order as shown.
|[PREV PAGE] [NEXT PAGE]|