Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft, Engine > Component Information > Service and Repair > Camshaft: Exploded View > Page 952

Page 8
background image

Standard:

No. 1: 26.000 - 26.021 mm (1.0236 - 1.0244 in)
No. 2, 3, 4: 23.500 - 23.521 mm (0.9252 - 0.9260 in)

CAMSHAFT JOURNAL OIL CLEARANCE

^

(Oil clearance) = (Camshaft bracket inner diameter) - (Camshaft journal diameter).

Standard:

No. 1 :0.045 - 0.086 mm (0.0018 - 0.0034 in)
No. 2, 3, 4 :0.035 - 0.076 mm (0.0014 - 0.0030 in)

Limit: 0.15 mm (0.0059 in)

^

If the calculated value exceeds the limit, replace either or both camshaft and cylinder head.

NOTE:
Camshaft bracket cannot be replaced as a single part, because it is machined together with cylinder head. Replace whole cylinder head assembly.

Camshaft End Play

^

Install dial indicator in thrust direction on front end of camshaft. Measure the end play of dial indicator when camshaft is moved forward/backward
(in direction to axis).

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft, Engine > Component Information > Service and Repair > Camshaft: Exploded View > Page 952

[PREV PAGE] [NEXT PAGE]