Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft, Engine > Component Information > Service and Repair > Camshaft: Exploded View > Page 958

Page 14
background image

Standard (Intake and exhaust)

: 34.000 - 34.016 mm (1.3386 - 1.3392 in)

VALVE LIFTER CLEARANCE

^

(Valve lifter clearance) = (Valve lifter hole diameter) - (Valve lifter outer diameter), Refer to [Camshaft Valve Clearance].

Standard (Intake and exhaust)

:0.013 - 0.039 mm (0.0005 - 0.0015 in)

^

If the calculated value is out of the standard, referring to each standard of valve lifter outer diameter and valve lifter hole diameter, replace either
or both valve lifter and cylinder head.

INSTALLATION

1) Install timing chain tensioners (secondary) on both sides of cylinder head.

Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft, Engine > Component Information > Service and Repair > Camshaft: Exploded View > Page 958

[PREV PAGE] [NEXT PAGE]