Equator 2WD V6-4.0L (2009)
Engine, Cooling and Exhaust > Engine > Camshaft, Lifters and Push Rods > Camshaft, Engine > Component Information > Service and Repair > Camshaft: Exploded View > Page 962
Large and small pin holes are located on front end face of camshaft (INT), at intervals of 180°. Face small dia. side pin hole upward (in
Though camshaft does not stop at the portion as shown, for the placement of cam nose, it is generally accepted camshaft is placed for the
4) Install camshaft brackets.
|[PREV PAGE] [NEXT PAGE]|