Equator 2WD V6-4.0L (2009)
Engine, Cooling and Exhaust > Engine > Timing Components > Timing Chain > Component Information > Service and Repair > Timing Chain: Exploded View > Page 1207
16) Install crankshaft pulley as follows:
a) Install crankshaft pulley, taking care not to damage front oil seal.
When press-fitting crankshaft pulley with plastic hammer, tap on its center portion (not circumference).
b) Tighten crankshaft pulley bolt in two steps.
Step 1 :44.1 Nm (4.5 kg-m, 33 ft-lb)
c) Remove Tool.
|[PREV PAGE] [NEXT PAGE]|