Equator 2WD V6-4.0L (2009)
Engine, Cooling and Exhaust > Exhaust System > Catalytic Converter > Component Information > Service and Repair > Exhaust Manifold and Three Way Catalyst: Exploded View > Page 1414
Cover engine openings to avoid entry of foreign materials.
INSPECTION AFTER REMOVAL
Check the surface distortion of the exhaust manifold mating surface with straightedge and feeler gauge.
Limit: 0.3 mm (0.012 in)
If it exceeds the limit, replace exhaust manifold.
Installation is in the reverse order of removal.
Exhaust Manifold Gasket
Install the exhaust manifold gaskets in direction as shown.
|[PREV PAGE] [NEXT PAGE]|