Equator 2WD V6-4.0L (2009)
Heating and Air Conditioning > Hose/Line HVAC > Component Information > Service and Repair > High-Pressure Flexible A/C Hose > Page 4072
Hose/Line HVAC: Service and Repair
Low-Pressure A/C Pipe: Removal and Installation
1. Discharge the refrigerant. Refer to [HFC-134a (R-134a) Service Procedure].
CAUTION: Cap or wrap the joint of the pipe with suitable material such as vinyl tape to avoid the entry of air.
Installation is in the reverse order of removal. Refer to [Refrigeration System: Component].
Replace the O-ring of the low-pressure A/C pipe with a new one, then apply compressor oil to it for installation.
After charging refrigerant, check for leaks.
|[PREV PAGE] [NEXT PAGE]|