Equator 2WD V6-4.0L (2009)
Fog/Driving Lamp Bulb: Service and Repair
Front Fog Lamp: Bulb Replacement
Front Fog Lamp: Bulb Replacement
REMOVAL
1. Position front fender protector aside. Refer to [Front Fender Protector: Removal and Installation].
2. Disconnect fog lamp connector.
3. Turn the bulb counterclockwise to remove it.
CAUTION:
-
Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it. Do not touch bulb by hand while
it is lit or right after being turned off. Burning may result.
-
Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of fog lamp.
When replacing bulb, be sure to replace it with new one.
INSTALLATION
Installation is in the reverse order of removal.
