Equator 2WD V6-4.0L (2009)
^
Mating surface between rear timing chain case and lower cylinder block
^
Mating surface between rear timing chain case and oil pan (upper)
^
Crankshaft oil seals (front and rear)
^
Oil level gauge guide
^
Camshaft position sensor (PHASE)
OIL PRESSURE CHECK
WARNING:
^
Be careful not to burn yourself, as the engine and engine oil may be hot.
^
Put the selector lever in the Park (P) position (A/T models) or Neutral position (M/T models), and apply parking brake securely.
1) Check engine oil level.
2) Remove engine undercover using power tool.
3) Disconnect the oil pressure switch (B) harness connector.
^
A: Oil pan (upper)
^
: Front
4) Remove the oil pressure switch (B).
CAUTION:
Do not drop or shock oil pressure switch.
5) Install Tools.
