Equator 2WD V6-4.0L (2009)
Maintenance > Fuses and Circuit Breakers > Fuse Block > Component Information > Diagrams > Diagram Information and Instructions > Page 828
HARNESS CONNECTOR (SLIDE-LOCKING TYPE)
A new style slide-locking type connector is used on certain systems and components, especially those related to OBD.
The slide-locking type connectors help prevent incomplete locking and accidental looseness or disconnection.
The slide-locking type connectors are disconnected by pushing or pulling the slider. Refer to the figure below.
Do not pull the harness or wires when disconnecting the connector.
Be careful not to damage the connector support bracket when disconnecting the connector.
|[PREV PAGE] [NEXT PAGE]|