Equator 2WD V6-4.0L (2009)
CAUTION:
Do not install one balance weight sheet on top of another.
3) Start wheel balancer again.
4) Install drive-in balance weight on inner side of road wheel in the wheel balancer indication position (angle).
CAUTION:
Do not install more than two balance weights.
5) Start wheel balancer. Make sure that inner and outer residual imbalance values are 5 g (0.18 oz) each or below.
^
If either residual imbalance value exceeds 5 g (0.18 oz), repeat installation procedures.
Wheel balance (Maximum allowable imbalance):
Tire Rotation
Tire Rotation
NOTE: Follow the maintenance schedule for tire rotation service intervals. Refer to [General Maintenance].
1. Remove wheels and tires.
2. Rotate wheels and tires on each side from front to back as shown. Do not include the spare wheel and tire when rotating the wheels and tires.