Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 3669

Page 13
background image

-

Poor terminal-to-wire connection.
Check each wire harness in problem circuits for poor connection by shaking it by hand lightly. If any abnormal condition is found, repair or
replace.

-

Wire insulation which is rubbed through, causing an intermittent short as the bare area touches other wiring or parts of the vehicle.

-

Wiring broken inside the insulation. This condition could cause continuity check to show a good circuit, but if only 1 or 2 strands of a
multi-strand-type wire are intact, resistance could be far too high.
If any abnormality is found, repair or replace.

Power and Ground Distribution > Power Distribution Module > Component Information > Diagrams > Diagram Information and Instructions > Page 3669

[PREV PAGE] [NEXT PAGE]