Equator 2WD V6-4.0L (2009)
Powertrain Management > Emission Control Systems > Catalytic Converter > Component Information > Service and Repair > Exhaust Manifold and Three Way Catalyst: Exploded View > Page 2012
Catalytic Converter: Service and Repair
Exhaust Manifold and Three Way Catalyst: Removal and Installation [VQ4ODE]
Perform the work when the exhaust and cooling system have cooled sufficiently.
1) Remove air cleaner case and air duct and resonator assembly.
Tool number: KV10114400 (J-38365)
Be careful not to damage heated oxygen sensor 2.
Discard any heated oxygen sensor 2 which has been dropped from a height of more than 0.5 m (19.70 in) onto a hard surface such
5) Remove center exhaust tube, main muffler and left front exhaust tube.
|[PREV PAGE] [NEXT PAGE]|