Workshop Repair Manuals

Suzuki Workshop Manuals

[PREV PAGE] [NEXT PAGE]

suzuki Workshop Repair Guides


Equator 2WD V6-4.0L (2009)

Powertrain Management > Emission Control Systems > Catalytic Converter > Component Information > Service and Repair > Exhaust Manifold and Three Way Catalyst: Exploded View > Page 2017

Page 6
background image

CAUTION:

Use new exhaust manifold nuts for installation. 

NOTE:

Tighten nuts No. 1 and 2 in two steps. The numerical order No. 7 and 8 show second step. 

-

White Arrow Indicates Front

Heated Oxygen Sensor 

CAUTION:

^

Do not over tighten air fuel ratio sensor 1 and heated oxygen sensor 2. Doing so may cause damage to air fuel ratio sensor 1 and
heated oxygen sensor 2, resulting in the "MIL" coming on.

^

Before installing a new air fuel ratio sensor 1 and heated oxygen sensor 2, clean exhaust system threads using oxygen sensor thread
cleaner and apply anti-seize lubricant.

Tool number

: - (J-43897-12)
: - (J-43897 18)

REMOVAL (RH) 

1) Remove engine assembly.
2) Loosen nuts with power tool in reverse order as shown.

^

White Arrow Indicates Front

NOTE:

Disregard the numerical order No. 7 and 8 in removal.

3) Remove gaskets.

CAUTION:

Powertrain Management > Emission Control Systems > Catalytic Converter > Component Information > Service and Repair > Exhaust Manifold and Three Way Catalyst: Exploded View > Page 2017

[PREV PAGE] [NEXT PAGE]