Equator 2WD V6-4.0L (2009)
Powertrain Management > Fuel Delivery and Air Induction > Fuel Injector > Component Information > Service and Repair > Exploded View > Page 2095
INSPECTION AFTER INSTALLATION
Check on Fuel Leakage
1. Apply fuel pressure to the fuel lines by turning ignition switch ON (with engine stopped). Then check for fuel leaks at the connections.
WARNING: Do not touch engine immediately after stopping, as engine becomes extremely hot.
NOTE: Use mirrors for checking at points out of clear sight.
|[PREV PAGE] [NEXT PAGE]|