Equator 2WD V6-4.0L (2009)
Powertrain Management > Transmission Control Systems > Relays and Modules - Transmission and Drivetrain > Relays and Modules - A/T > Control Module, A/T > Component Information > Service and Repair > Page 2245
8) Install bolts (A), (B) and (C) in control valve with TCM. Tighten bolt (1), (2) and (3) temporarily to prevent dislocation. After that tighten them in
order (1 -> 2 -> 3). Then tighten other bolts. Tighten control valve with TCM bolts to the specified torque.
|[PREV PAGE] [NEXT PAGE]|